Sometimes venting through a wall isn't an option and more creative solutions need to be considered; the 6 inch adjustable window vent by Vent Works was designed to provide the perfect solution for those that need to vent out of a window.
The window vent is made with 24 gauge galvanized steel and has an aluminum back draft damper to prevent drafting from outdoors, it's the perfect solution if venting through the wall is not an option, or is undesirable. Simply place the vent in an open window, slide the side panels to fit the window opening (14-36 inch window), and close the window. Standard, low profile dryer vent caps add considerable resistance to airflow. So we designed this vent with an enlarged exterior hood to minimize airflow resistance.
This window vent can also be used to vent spray booths, laser engraving machines, exhaust fan blowers and virtually anything else with a 6" inch round exhaust.
- Downloadable 6 Inch Window Vent Specification Sheet
- Duct Diameter 6" Inch Round Duct Outlet
- Hood Width 7" Inch
- Hood Depth 4-1/2" Inch
- Hood Height 8" Inch
- Panel Length 14"-18" Inch, 18"-24" Inch, 24"-36" Inch (3 sizes)
- Panel Height 10" Inch
- Panel Width 1-1/8" Inch
- 24 Gauge Galvanized Steel
- Spring Loaded Back-Draft Damper
- Made In USA
Special Delivery Instructions
If there’s any special instructions for delivery, please add it to the notes section so we can forward that information to the carrier. The notes section is located in the cart, see below for a visual example.